Reinforced pull pin suitable for the manual Z50 engine of Puch X30 Sport NS / NL, as well as Puch X30 Velux mopeds / mopeds.
Design with thrust ball bearing with 60° contact angle and enlarged contact surface on the pivot shaft. In addition, the pull pin is bolted to the bearing and not caulked, which makes it almost impossible to tear out.The reinforced clutch springs in the accessories can be used in conjunction with the clutch bearing without any problems.
Adjusting the clutch is no longer necessary with this version.
Attention: A half-height M10x1 nut must be used to mount the clutch so that the screw connection of the tension bolt cannot touch the nut.
Alternative of the original Puch spare part number: 050.2.1230.0
Details
| Manufacturer | HS-Retro |
| Material | Steel, Aluminum |
| Surface | Hardened, anodized |
| Area of application | Original, High End |
| Height | 35.2 mm |
| Ø outside | 44.75 mm |
| Color | black |
| Alternative version of the Puch OEM number | 050.2.1230.0 |
Suitable for the following models
| Puch | Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 |
Accessories & related products
swiing® revival clutch spring 2-disc version (Version 2.0) | Puch Z50
Spring design: Pressure spring · Ø wire: 4 mm · Ø inside: 30.5 mm · Ø outside: 39 mm · Total length: 19.5 mm · Color: gray · Manufacturer: swiing® revival parts · Number of components: 1 pcs · Material: Spring steel · Surface: raw · Area of application: Original · Area of application: Standard
EUR 21.00
swiing® ingenious clutch spring reinforced +20% (Version 2.0) | Puch Z50
Spring design: Pressure spring · Ø wire: 4.6 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Ø inside: 30 mm · Color: blue · Ø outside: 39 mm · Total length: 20.5 mm · Number of components: 1 pcs · Area of application: Tuning
EUR 28.00
swiing® ingenious clutch spring reinforced +40% (Version 2.0) | Puch Z50
Spring design: Pressure spring · Manufacturer: swiing® ingenious parts · Number of components: 1 pcs · Material: Spring steel · Surface: coated · Color: red · Ø wire: 4.5 mm · Total length: 23.5 mm · Ø outside: 39 mm · Ø inside: 30 mm · Area of application: Tuning
EUR 28.00
Serrated lock washer M10 galvanized
Ø inside: 4.5 mm · Ø inside: 5.5 mm · Ø inside: 6.35 mm · Ø inside: 7.4 mm · Ø inside: 10.8 mm · Ø inside: 12.8 mm · Material: Steel · Surface: galvanized (blue) · Thread size: M10 · Thread size: M12 · Thread size: M4 · Thread size: M5 · Thread size: M6 · Thread size: M7 · Thread size: M8
EUR 0.35
Moped fans like you also bought:
swiing® revival gasket set Z50 engine | Puch X30 NS / NL
Manufacturer: swiing® revival parts · Number of components: 10 pcs · Material: Sealing paper · Ø outlet inside: 22 mm · Area of application: Standard · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm · Hole spacing inlet: 32 - 38 mm
EUR 23.40
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch
EUR 11.60
EUR 25.78/l
Surflex clutch plate set | Puch Z50
Ø inside: 46.3 mm · Ø inside: 51.3 mm · Ø outside: 69.6 mm · Ø outside: 74.8 mm · Manufacturer: Surflex · Material: Composite materials · Material: Steel · Area of application: Original · Recording type: Interlocking · Number of slats: 2 pcs · Thickness: 2.75 mm
EUR 41.00
swiing® ingenious clutch spring reinforced +20% (Version 2.0) | Puch Z50
Spring design: Pressure spring · Ø wire: 4.6 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Ø inside: 30 mm · Color: blue · Ø outside: 39 mm · Total length: 20.5 mm · Number of components: 1 pcs · Area of application: Tuning
EUR 28.00
Collection only possible with online purchase and appointment.
