Red 2-phase LED light with high and low beam suitable for various headlights with corresponding bayonet mount, which were installed on mopeds, mopeds and small motorcycles.
Voltage: 12 volts
Socket: BAY15d (offset mounting pins)
Ø base: 15 mm
The LED bulbs not only look great and last significantly longer than conventional bulbs, but are also an important safety factor in road traffic. Safety through visibility! Convert your old bulbs to LED technology now.
The headlight bulb can be switched between full and dipped beam.
- All diodes light up at full beam.
- At low beam, all diodes light up dimmed.
In order to ensure the functionality of the LED light source, the installation of a 12V voltage regulator is essential.
You can find the matching voltage limiter in the accessories section.
You can find the higher-quality alternative from the swiing brand in the accessories section.
Depending on the terminology used, this component is also known as a lamp, illuminant, bulb, backlight or incandescent lamp.
Details
| Tension | 12 V |
| Color | red |
| Bulb holder | BAY15d |
| Ø base | 15 mm |
| Total length | 43 mm |
| Test mark | none |
| Ø Lamp head | 25 mm |
| LED | Yes |
Accessories & related products
Hot 
Leonelli 12V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Tension: 12 V · Type of current: Alternating current (AC) · Total length: 50 mm · Performance: 100 W · Width: 27 mm · Height: 15 mm · Mounting type: Screws · Ø mounting hole: 6 mm
EUR 41.00
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm
EUR 3.30
Hot
Leonelli 12V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Tension: 12 V · Type of current: Alternating current (AC) · Total length: 50 mm · Performance: 100 W · Width: 27 mm · Height: 15 mm · Mounting type: Screws · Ø mounting hole: 6 mm
EUR 41.00
Clutch cable / brake cable Ø 1.5 mm x 225 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.5 mm · Nipple shape: Pears · Cable length: 2250 mm · Piaggio OEM number: 270460
EUR 2.80
GPO steerer tube nut M26x1 closed fork plate chrome
Manufacturer: GPO · Area of application: Standard · Material: Steel · Surface: chrome-plated · Nut type: Cap nut · Drive: External hexagon · Ø outside: 28.9 mm · Ø outside: 36.4 mm · Thread type: MF26x1 (fine pitch thread) · Thread depth: 12 mm · Height: 13.8 mm · Width across flats SW: 30 mm
EUR 11.60
Collection only possible with online purchase and appointment.
