Hot 
Complete LELEU spoke wheel hub with brake anchor plate and axle for your Puch Maxi S, N and X30 Velux (except Ur-Velux) moped / moped.
The wheel hub is from new production.
The brake anchor plate was produced again in a small series using the old casting tools and therefore corresponds to the original from times gone by.
The wheel hub comes from new production, is precisely manufactured and impresses with its high-quality workmanship. The hub is equipped with deep groove ball bearings and an M11 axle.
The 36 spoke holes with a diameter of 3.7 mm are also suitable for 2.9 mm stainless steel spokes.
Note: Unfortunately, the brake pads are something that didn't convince us. We recommend replacing them with a high-quality alternative from the accessories range.
Details
| Manufacturer | LELEU |
| Material | Aluminum |
| Axle length | 160 mm |
| Ø axle | 11 mm |
| Ø drum | 80 mm |
| Ø outside | 115 mm |
| Thread type | MF11x1 (fine pitch thread) |
| Number of spoke holes | 36 pcs |
| Ø spoke hole | 3.7 mm |
Suitable for the following models
| Puch |
Accessories & related products
Rear wheel hub spoke 36 holes with axle (1A quality) | Puch Maxi, X30 NG-2AH
Color: silver · Material: Aluminum · Total length: 185 mm · Ø axle: 12 mm · Number of fixing points: 6 pcs · Area of application: Standard · Ø drum: 80 mm · Ø outside: 115 mm · Ø bolt circle: 105.5 mm · Width: 105 mm · Thread type: FG34.8 (1.37" 24G) · Thread type: M5x0.8 (standard thread) · Thread type: MF12x1 (fine pitch thread) · Thread length: 12 mm · Thread length: 17 mm · Thread length: 43 mm · Number of spoke holes: 36 pcs · Ø spoke hole: 3.7 mm · Puch OEM number: 349.5.41.803.1
EUR 110.50
Moped fans like you also bought:
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Thread type: MF12x1 (fine pitch thread) · Installation direction: horizontal / horizontal · Outlet direction: below · Mounting type: Union nut · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
EUR 11.50
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C · Area of application: Gearbox lubrication with clutch
EUR 11.50
EUR 25.56/l
swiing® revival 17" rear fender primed | Puch Maxi N
Manufacturer: swiing® revival parts · Material: Steel · Surface: primed · Color: black · Folding the ends: closed folded · Folding the ends: not folded · Shape of the mudguard: angular · Total length over ends: 625 mm · Scope: 940 mm · Wide mudguard profile: 82 mm · Mounting type: Nuts & bolts · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 285 mm · Wheel size [inch]: 17 "
EUR 39.50
GPO 17" spoke set incl. nipple (2.9 x 188 mm) Inox
Nipple length: 14 mm · Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Surface: raw · Quantity: 36 pcs · Color: silver · Length from hook: 188 mm · Ø spoke head: 5.35 mm · Ø spoke: 2.9 mm · Thread length: 11 mm · Nominal diameter (thread): 3.15 mm · Ø nipple head: 7.9 mm · Ø Nipple neck: 5 mm · Hook length: 9 mm · Hook angle: 95 °
EUR 63.90
Collection only possible with online purchase and appointment.
