Racing variator from Pinasco for your Piaggio Ciao, Si, Bravo, Boxer moped / moped with variomatic drive.
This variator impresses with its clean workmanship and, with its optimized roller tracks and pitch angles, ensures constant acceleration and more top speed than the original.
In terms of performance, the three racing variators from Polini, Malossi and Pinasco are closely matched. Even after countless kilometers of testing, we were unable to detect any significant differences.
The scope of delivery includes 6 gram weights. However, we recommend a set with a larger selection of weights (16 x 13 mm) for tuning. With souped-up engines, the belt often tends to slip, which is why we recommend that you also change the counter-pressure spring in the torque converter. This is also included in the scope of delivery.
If you have a Piaggio Ciao, you should also not use the Polini drive belt (item 24013), but the Bosch V-belt (item 29570), as the Polini belt is too narrow at the top.
The parts described above and other parts for your Vario drive can be found in the accessories section.
Quality product from the Italian manufacturer Pinasco.
Details
| Manufacturer | Pinasco |
| Number of weights | 6 pcs |
| Weight Standard weights | 6 g |
| Ø Weights | 16 mm |
| Length Weights | 13 mm |
| Gearbox type | Vario |
Suitable for the following models
| Piaggio | Ciao - P, SC, PX, C24 Si Bravo / Super Bravo Boxer Grillo |
Accessories & related products
Stage6 6.5 - 9.5 g vario weight set Ø 16 x 13 mm
Manufacturer: Stage6 · Gearbox type: Vario · Number of weights: 24 pcs · Weight Standard weights: 6.5 g · Weight Standard weights: 7.5 g · Weight Standard weights: 8.5 g · Weight Standard weights: 9.5 g · Ø Weights: 16 mm · Length Weights: 13 mm
EUR 38.70
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Area of application: Standard · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm
EUR 3.30
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Drive: Slot · Ø Cable bushing: 1.6 mm · Thread length: 4 mm · Ø outside: 5 mm · Screw head: Lens head · Total length: 6 mm · Thread type: M4x0.7 (standard thread)
EUR 2.35
swiing® revival sliding block (for screwing) Magura throttle twist grip
Manufacturer: swiing® revival parts · Material: Aluminum · Surface: anodized · Width: 7.7 mm · Thread type: M4x0.7 (standard thread) · Thread length: 8.8 mm · Total length: 12 mm · Height: 8.8 mm · Drive: Hexagon socket · Color: black
EUR 11.60
GPO 85° carburetor pipe bend brass M6x0.75
Manufacturer: GPO · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Angle: 85 ° · Ø outside: 6 mm · Total length: 45.5 mm · Total length: 53.5 mm · Internal thread: MF6x0.75 (fine pitch thread) · Thread type: MF6x0.75 (fine pitch thread) · Height: 30 mm · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
EUR 6.95
Stand 14 mm axle (1A quality) | Piaggio Ciao PX, C24
Manufacturer: Made in Italy · Material: Steel · Color: black · Surface: varnished · Stand base - center mount (A): 232 mm · Total width of stand base (B): 200 mm · Wide receptacle (C): 78 mm · Ø Receptacle (D): 14 mm · Wide upright foot (F): 20 mm · Total height: 250 mm
EUR 35.10
swiing® revival locking plate nut Variomatic Inox | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Surface: blank · Area of application: Original · Area of application: Standard · Number of lobes: 1 pcs · Ø inside: 8.15 mm · Ø outside: 33.5 mm
EUR 4.00
Collection only possible with online purchase and appointment.
