Special adjusting screw holder made of aluminum to be able to mount adjusting screws on the old Magura grips on your moped, moped and small motorcycle.
The holder is pushed into the Magura grip with the chamfered side.
Attention: Only applicable to the old Magura grips, where the throttle cable is mounted directly with a cable clamp in the grip tube (not suitable for the new grips with sliding block).
Internal thread: M6x1 mm (standard set screws)
Material: aluminium
Surface: colourless anodized
Figures 4 & 5 show the mount in assembled condition.
Nostalgic product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® revival parts |
| Material | Aluminum |
| Surface | anodized |
| Color | silver, transparent |
| Thread type | M6x1 (standard thread) |
Suitable for the following models
| Universal | |
| Puch | |
| Sachs | |
| Zündapp Belmondo |
Moped fans like you also bought:
Magura cable clamp Ø 8 x 15 mm
Ø outside: 8 mm · Total length: 15 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Width across flats SW: 7 mm · Thread type: M6x1 (standard thread) · Manufacturer: Magura · Thread length: 7 mm · Ø Cable bushing: 2.3 mm · Ø Bundle: 6 mm · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Area of application: Standard
EUR 2.95
Magura adjusting screw brake short
Manufacturer: Magura · Material: Brass · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Thread length: 15 mm · Total length: 31 mm · Total length: 40 mm · Ø External head: 9.15 mm · Shank length: 6.9 mm · Ø shaft: 6.1 mm · Drive: Knurled screw · Color: silver
EUR 4.00
Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C
Manufacturer: Elring · Material: Silicone · Contents [ml]: 70 ml · Color: gray · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Temperature resistance (min.): -60 - 315 °C · Gap dimension (max.): 2 mm · Area of application: Chemistry
EUR 23.40
EUR 334.29/l
Magura set screw M6x34 mm lock nut SW10
Slotted: No · Ø Receptacle: 7.05 mm · Manufacturer: Magura · Ø cable holder: 3.05 mm · Width across flats nut: 10 mm · Width across flats Screw: 8 mm · Material: Brass · Surface: nickel-plated · Thread length: 23 mm · Total length: 34 mm · Thread type: M6x1 (standard thread)
EUR 2.95
Crankshaft | Zündapp (Type 434 / 247)
Material: Steel · Cheek type: standard · Crankshaft stroke: 42 mm · Ø coupling pin / vario pin: 15 mm · Thread type: MF10x1 (fine pitch thread) · Connecting rod length center-center: 91.5 mm · Thread length: 8.5 mm · Thread length: 14 mm · Total length of crankpin on clutch side: 40.4 mm · Total length crankpin ignition side: 65 mm · Ø crank webs: 85 mm · Ø piston pin (B): 12 mm · Ø Connecting rod eye: 16 mm · Ø Bearing seat (clutch side): 15 mm · Ø Bearing seat (ignition side): 15 mm · Dimension needle bearing: 12 /15 x 14.2 mm (axe 12) · Wide crank webs: 30 mm · Ø 1st step (on the coupling side): 21 mm · Ø 2nd shoulder (on the clutch side): 9.6 mm · Length of shoulder (ignition side): 35 mm · Weight: 892 g
EUR 187.90
Collection only possible with online purchase and appointment.
