Contactless, electronic ignition module suitable for all Bosch & Ducati ignitions, which are installed on various mopeds. (Sachs, Puch, Zündapp Belmondo, etc.).
Perfect alternative to electronic ignition (HPI, PVL, Selettra).
Installation
First remove the interrupter, capacitor and ignition coil from the base plate. The electronic ignition module is inserted in place of the ignition coil.
The screws for fastening the ignition coil can be used. Now connect the red cable on the ignition module to the switch-off cable. The light coil does not need to be removed. The electrode gap on the spark plug should be set to 0.7-0.8 mm.
Caution: A spark plug connector with at least 10 kOhm discharge must be used, the spark plug must not be discharged!
With Beru or MERIT spark plug connectors, misfiring may occur.
Adjusting the ignition
In principle, nothing needs to be adjusted on the ignition. Only the ignition plate can be turned slightly for a perfect ignition spark, the rest is regulated by the ignition chip.
In the basic setting, the three fastening screws of the ignition plate are located in the middle of the slotted holes. Pre-tensioning is achieved by turning the ignition plate against the direction of motor rotation. Fine adjustment is carried out at medium speed using the strobe light.
Matching spark plugs, spark plug connectors and the strobe light can be found in the accessories section.
Quality product from the Bosnian manufacturer VEC.
Details
Total length | 77 mm |
Manufacturer | VEC |
Ø cable holder | 5 mm |
Place of use | Internal (in the ignition) |
Area of application | Standard, Original, Performance |
Ø mounting hole | 4.6 mm |
Color | black |
Ø Internal flywheel | 90 mm |
Mounting type | Screws |
Cable length | 140 mm, 420 mm |
Height | 48 mm |
Hole spacing | 54 mm |
Number of fixing points | 2 pcs |
Suitable for the following models
Universal | |
Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 50/5 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV 505 (with pedal shaft) - 1A (AT), 2A (HG) 535 |
Zündapp Belmondo |
Accessories & related products
HPI racing ignition 12V with light 60W
Manufacturer: HPI · Material: Aluminum · Material: Steel · Tension: 12 V · Light coil voltage: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø Internal flywheel: 61.5 mm · Ø Flywheel outside: 71.5 mm · Ø cable: 7 mm · Mounting type: Screws · Number of fixing points: 6 pcs · Weight: 340 g · Area of application: Tuning
EUR 349.20
Moped fans like you also bought:
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Width across flats (trigger): 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Total length: 55 mm · Total length: 75 mm · Strength class: 8.8 · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Number of components: 1 pcs
EUR 11.50
swiing® revival cable repair set ignition
Color: black · Color: yellow · Cable cross-section [mm²]: 0.75 mm² · Cable cross-section [mm²]: 1 mm² · Ø outside: 1.9 mm · Total length: 300 mm · Ø single core: 0.15 mm · Number of cables: 2 pcs · Manufacturer: swiing® revival parts · Material: Copper · Material: Plastic · Surface: raw · Area of application: Standard
EUR 10.40